Rotary RLP77 7,700lb Scissor Lift

(No reviews yet) Write a Review
SKU:
RLP77
  • Rotary RLP77 7,700lb Scissor Lift
$8,545.00
 
Full Description 

See the source image                                                                                                                                 See the source image

Best suited for quick service, fast repair work, or shops with small spaces, this engineered lightweight lifting scissor structure will last you for years to come. A low profile design allows vehicles to pass over the lift platform with ease. Folding ramps with rollers provide perfect runway access for vehicles spotting. Ramps fold away to 65 degrees offering better access when wheel work is performed.

Extra wide platforms provide plenty of clearance driving on and off the lift; which allows for a variety of pickup points to handle many of today's vehicles. Technicians will benefit from the extra headroom this lift provides at over 78 inches in height when installed above ground. Incorporated locking system at each platform cylinder provides worry free use and peace of mind. All critical parts are housed in a sleek console taking up less than 2 square feet of floor space. In-set air filter and regulator assemblies reside outside the console for easy access. 12 feet of standard hose along with included covers, gives you a variety of console locations.

Patent pending inverse piston displacement synchronizer - Synchrodrive™

Synchrodrive™ Equalization System Logo
The Sychrodrive is a hydraulic system that maintains platform equalization during lifting and lowering cycles. Blocked Platform functionality prevents out of level situations in the event of inadvertent platform or scissor obstructions. The secret behind the system:
  • Less moving parts
  • No sensors to fail
  • No electronics (perfect for flush or recessed installation)
  • It's not sensitive to independent pressure(s)
  • Less hoses, valves and seals used
  • Easy installation
  • Simple bleeding procedure
RLP77 Blocked PlatformPictured above: Rotary platforms remain equal with obstruction present.  Competitor platform continues lowering creating unsafe conditions.

The Rotary Lift advantage highlights the additional features that make a Rotary Lift something special, versus other lift manufactures that just look at putting as little in their product as possible to get by. Images of these features and a description are listed below.

RLP77 Folding Ramps
Hinged ramps fold 65 degrees down and away, allowing for more access to do wheel and brake service on the vehicle. These same ramps fold up, lock in place and increase the lifting capabilities by extending the pick-up point surface area.
RLP77 Double Section Scissor Lift Ramp Roller
13 inch long underhung ramps with rollers maximize rubber block footprint, increasing reliability, and protect unlevel floor installations Ramps are 13 inches long for low approach angle and maximum lift length with ramp in up position. Ramps fold down to 65 degree tilt providing better access to vehicle tires (versus 45 degrees max for all competition). Ramps include Diamond Plate to help Increase Drive-on Traction
Galvanized Bottom Weldment Painted Over
Hot Dipped Galvanized bottom weldment for corrosion protection of below ground flush mount components.
RLP77 Double Section Scissor Lift Lock
26 Lock Positions featuring our negative rake tooth design. Locks ratchet over each other then interlock when lift it lowered to those locks.
RLP77 Double Section Scissor Slider Block
Easily access slider blocks for regular maintenance, see instruction manual for more details.
RLP77 Double Section Scissor Cushion
Adjustable lift dampener eliminates end of downward travel sudden impacts. Lifts not equipped with this slam into the floor causing damage to shop/lift and create unwanted loud noise.
RLP77 Kicker Roller Assembly
Stainless Steel Kicker Rollers provide long lasting protection to critical contact points
RLP77 Double Section Scissor Kicker Plate
Kick Plate eliminates corrosion on high contact wear area
RLP77 Lifting Ramps
Engagement and release of ramps is easily attainable from any angle of the lift, improving technician accessibility.
RLP77 Double Section Scissor Lift Diamond Plate
One Piece Formed Diamond Plate Platforms. Maintain Rubber Block Positioning. Increase Drive-Over Traction
RLP77 Double Section Scissor Lift High Strength Steel
Composite High Strength Steel Scissor Legs, Patent Pending
RLP77 Double Section Scissor Lift Controls
Scaled Up Control Console Design with Filter, Regulator, Lubricator assembly suppressed in side of cabinet, fully hinged door and top
RLP77 FLR
Filter, Regulator, Lubricator assembly suppressed in side of cabinet
Synchrodrive™ Equalization System Inside
Synchrodrive™ Equalization System, a hydraulic cylinder system that does the lifting work equally.
RLP77 Fully Down
Pictured is the RLP77 collapsed to its 4-1/8 inch height off the floor. Outriggers on either side allow you to pull wider wheel base vehicles over the lift while still picking up the vehicle via the platform. https://youtu.be/hlXYj8Yi1C8

The RLP77 can fit into the tightest spots, while still giving you power and wheels free pick-up. The powerful motor raises the platforms to the full rise height of 78 inches in just 39 seconds, making it ideal for quick service bays. Unlike other lift styles, the drive over design of the platforms allow a single technician to spot the vehicle, increasing the overall productivity of your shop. The durable lifting pads are stackable, which allows the RLP77 to pick up a wide variety of vehicles within its rated load, from low profile cars to SUV’s and small trucks. Flush mounting is also available, leaving you a clean looking and obstruction free shop floor. RLP77-Dodge-Charger.png As always, your technician’s well-being was top of mind when Rotary set out to design the RLP77. An incorporated locking system at each platform cylinder features our negative rake tooth design which provides worry free use and peace of mind. While competitor’s scissor lifts can become unbalanced if a single platform gets impeded, the RLP77 has Rotary’s patent pending SYNCHRODRIVE™. The SYNCHRODRIVE is a hydraulic system that maintains platform equalization during lifting and lowering cycles. Blocked Platform functionality prevents out of level situations in the event of platform or scissor obstructions, keeping the vehicle on the lift and your technician out of harm’s way. Durability is another key aspect of the RLP77’s design. Constructed of high strength steel with powder coated diamond plate platforms, the structure is there for the long haul. The underhung ramps are equipped with rollers to increase reliability, and protect from un-level floor installations. Ramps are 13 inches in length, allowing for a low approach angle and maximum lift length. They also fold down 65 degrees providing better access to vehicle tires and suspensions. The ramps also include diamond plate to help increase drive-on traction and maximize life. RLP77 Scissor Lift, Low Profile, High Power!

  • Synchrodrive™ Equalization System
  • Low Profile Design, Integrated Folding Ramps
  • Full Diamond Plate Powder Coated Platforms
  • Galvanized Bottom Weldment
  • Composite High Strength Steel Construction
  • Intuitive Console Controls
  • For any vehicle within the rated capacity
  • Flush / Surface Mount Options
  • ALI Gold Certified (RLP7N0000)
 

 

Specs

 

Specification RLP77
Capacity 7,700 LBS.
Rise 78-5/8"
Lowered Height 4-1/8"
Overall Length 85"
Overall Width 85"
Runway Width 24-3/4"
Width Between Platforms 23-5/8"
Platform Length 59"
Motor/Voltage Single Phase - 4 Hp, 60Hz, 230V
Compressed Air Connection 85-110 psi
Time of Full Rise 39 seconds

 

 

View AllClose
-->