HB-10 Bender with 028 Die Package
Huth HB-10 Pipe Bender w/ 028 Die Package
Huth's HB-10 Complete Bender Package includes Huth's newest Manual Knee Control Bender and comprehensive tooling package - everything you need to create O.E.- fit and custom-bent pipes.
The HB-10 is Huth's entry level bender, designed to introduce you to Huth quality while showing you the incredible profit potential that awaits you.
The HB-10 features knee control activation, manual depth-of-bend control and 58,000 lbs. of bending power - more than enough for 3" tubing.
The built-in heavy duty swager/expander gives you complete end-finishing capabilities - 1" to 3" tubing on the swager end and 1" to 51/2" tubing on the expander end.
With Huth’s Accu-Sizer™ automatic bull’s-eye expanding system, you’ll be able to dial in precise expansions every time.
Slim Knee Control Activation allows you to get closer to your work for quick, precise bending.
An Easy-to-Read Bend Indicator shows how far into a bend you are.
Plus, you receive bending dies, end-finishing tooling and a Huth DVD - everything you need to start bending pipes for thousands of applications.
Huth 3" Tube Bend (top on tube) vs. Asian-made
(Notice dimpling on bend in lower sample)
Huth 3" Tube Bend (tube to left) vs. Asian-made
(Notice tube flattening on the right)
The Easy to Use Pipe Bender
A compression pipe bender is an extremely powerful and versatile tool, but many who have not used one don’t fully appreciate how easy it is to use. When we get people to do their first bend, intimidation tends to fade away and enthusiasm to do more takes over!
There are two ends to the machine … the bending end, and the end-forming end. We’ll focus on the bending end to show just how simple this tool is. There are 3 things you need to know in advance … the distance between bends, the orientation of the desired bend, and the depth of the desired bend.
Plot your distances with a marker: Mark your pipe where you want your bends, working from left to right.
Now turn the bender on … you are almost ready to go: Apply lubrication and set your pipe in the jaws.
Setting a rotation dial to keep oriented: Prior to your 1st bend, setting a rotation dial on the far right end of your pipe, set to zero, will keep you oriented as your progress through multiple bends on each pipe. This is especially important if you are using bending program cards.
Choose Bend radius: Smaller radii give tighter bends, larger radii are more forgiving. Normally smaller tubes utilize smaller radii (larger tubes use larger radii) with a minimum 1.5-2X the tube OD.
Bend to the right depth: Every bender has a depth of bend indicator, and automatic benders let you pre-set the depth of bend. The pointer tells you when you reach your target bend angle.
Basically, that’s it. There are times when a bit more knowledge helps (When do I use a ½ shoe? What do I use for thin-walled material?). But these are compression bender basics for bending with your machine!
"Bending exhaust pipe without cards? Watch this!"
- Comes with comprehensive tooling package and instructional DVD
- Easy-To-Use Knee Pad Control
- Manual Depth-of-Bend Indicator
- Complete Manual Control
- 58,000 lbs of bending power - More than enough for 3" tubing
- Agricultural Cylinders
- Flat Tool Tray
- Bending Die Retainer
- Heavy-Duty Swager/Expander
- Rugged I-Beam Construction
- Exclusive Safety-Guard Package
- Front Swivel Casters w/o Brakes
- 220V, 60 Hz Operation. Single-Phase requires 30 amp service. Three-Phase requires 20 amp service.
The HB-10 Bender package comes as shown. However, the HB-10 accepts all of Huth’s standard tooling and accessories such as the Ready-Rak, Rod Bracket Bender and Oil Filter Crusher.
* Additional tooling available at extra charge.
HB-10 Package Includes 028 Die Package
|Part#||Item Name||Part#||Item Name|
|5530||5” Radius Die 3”||557||Domer Die 1¾”-2½”|
|5412||5” Radius Die 2½”||558||Domer Die 2-5/8”- 2¾”|
|5414||5” Radius Die 2¼”||555||Female Ball Die 1¾”-2”|
|5200||5” Radius Die 2”||556||Female Ball Die 2¼”- 2½”|
|4414||4” Radius Die 2¼”||550||Male Ball Die 1¾”: Swage 2”|
|4200||4” Radius Die 2”||552||Male Ball Die 2”: Swage 2¼”|
|3134||3” Radius Die 1¾”||553||Male Ball Die 2¼”: Swage 2½”|
|3112||3” Radius Die 1½”||554||Male Ball Die 2½”: Swage 2¾”|
|1350||(2) Full Back Shoes 3”||112||Swage Die 1½”|
|4412||(2) Full Back Shoes 2½”||134||Swage Die 1¾”|
|4211||(2) Full Back Shoes 2¼”||508||Arbor|
|1200||(2) Full Back Shoes 2”||498||Arbor Tip|
|1134||(2) Full Back Shoes 1¾”||499||Arbor Tip|
|1112||(2) Full Back Shoes 1½”||473||Segment 1-3/8”- 1-3/4”|
|4410||Half Shoe 2½”||474||Segment 1-3/4”- 2-1/8"|
|4416||Half Shoe 2¼”||475||Segment 2-1/8” – 2-1/2”|
|1045||Half Shoe 2”||476||Segment 2-1/2”-3”|
|1040||Half Shoe 1¾”||97050||Die Spring|
|1038||Half Shoe 1½”||870||O-Ring Kit|
|1750||Collet 2½”||815||Die Holder (853)|
|1725||Collet 2¼”||816||Die Holding Pin|
|1720||Collet 2”||855||Die Pins (Qty. 30)|
|1734||Collet 1¾”||1079||(2) Full Shoe Spacers|
|1712||Collet 1½”||1080||Half Shoe Spacers|
|853||Flare Tool||97302||Huth Instructional Video|
Optional Tooling Available:
- 477 Segment Set, 3" - 3-1/2"
- 478 Segment Set, 3-1/2" - 4"
- 980 Vintage Bend Data System
- 986 Muffler Stand
- Square Tooling
- Segmented expander tooling
- Segmented Flaring tooling
- Segmented V band tools
- Segmented bead tooling
- Segmented header flange tooling
- Solid swagers
- Solid ball tools
- Header collector tools
Call our Sales Team to identify the best tube forming tooling for you!
Optional 95458 Foot Pedal Kit
Optional Die Tooling Packages Available